NUST Research Collaborate Portal

Sadaqat Ali

Assistant Professor

School of Mechanical & Manufacturing Engineering

About

Dr. Sadaqat Ali is working as Assistant Professor in the School of Mechanical & Manufacturing Engineering. Dr. Sadaqat Ali has a PhD in Materials and Manufacturing Engineering . Dr. Sadaqat Ali has published 24 research articles & conference papers having a citation count of 416 , carried out 0 projects and filed 0 intellectual property.

Research Tags

Manyufacturing Rapid prototyping

Research Projects

Industry Projects

Amount Granted

0.0 M

Publications

Citations

416

Intellectual Property

Publication Types

Project Types

Publications by Year

Projects by Year

Research Collaborators

Education

Experience

Awards

Memberships

No project records found for this faculty member

Research Articles

Conference Proceedings

Books

Book Chapters

Editorial Activities

Synthesis, surface nitriding and characterization of ti-nb modified 316l stainless steel alloy using powder metallurgy 2021

Sadaqat Ali

Muhammad Irfan (Najran University)

Usama Muhammad Niazi (National University of Technology (NUTECH))

Ahmad Majdi Abdul Rani (Universiti Teknologi PETRONAS)

Imran Shah (National University of Technology (NUTECH))

Stanislaw Legutko ( Poznan University of Technology)

Saifur Rahman (Najran University)

Mohammed Jalalah (Najran University)

Mabkhoot A. Alsaiari (Najran University)

Adam Glowacz (AGH University of Science and Technology)

Fahad Salem AlKahtani (Najran University)

Journal: Materials, Volume:14, Issue:12, Article Number 3270

Impact Factor: N/A Citations: 7 Quartile: 1

Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-edm process: A review 2021

Md Al-Amin (Universiti Teknologi PETRONAS)

Ahmad Majdi Abdul-Rani (Universiti Teknologi PETRONAS)

Mohd Danish (University of Jeddah)

Saeed Rubaiee (University of Jeddah)

Abdullah bin Mahfouz (University of Jeddah)

Harvey M. Thompson (University of Leeds)

Sadaqat Ali

Deepak Rajendra Unune (University of Sheffield)

Mohd Hafis Sulaiman (International Islamic University Malaysia)

Journal: Materials, Volume:14, Issue:13, Article Number 3597

Impact Factor: N/A Citations: 59 Quartile: 1

Study of burr width and height using ANOVA in laser hybrid micro milling of titanium alloy (Ti6Al4V) 2022

Sabeeh ul Hasan

Sadaqat Ali

Syed Husain Imran Jaffery

Emad Ud Din

Aamir Mubashar

Mushtaq Khan

Journal: Journal of Materials Research and Technology, Volume:21, Page:4398-4408

Impact Factor: N/A Citations: 16 Quartile: 1

An Efficient Approach for Nitrogen Diffusion and Surface Nitriding of Boron-Titanium Modified Stainless Steel Alloy for Biomedical Applications 2019

Sadaqat Ali

Ahmad Majdi Abdul Rani (Universiti Teknologi PETRONAS)

Riaz Ahmed Mufti

Sri Hastuty (Universitas PERTAMINA)

Murid Hussain (COMSATS University)

Nasir Shehzad (COMSATS University)

Zeeshan Baig (Centre of Excellence in Science & Applied Technologies)

Abdul Azeez Abdu Aliyu (Bayero University Kano)

Journal: Metals, Volume 9(7), Article Number 755

Impact Factor: 2.117 Citations: 14 Quartile: 2

The Influence of Nitrogen Absorption on Microstructure, Properties and Cytotoxicity Assessment of 316L Stainless Steel Alloy Reinforced with Boron and Niobium 2019

Sadaqat Ali

Ahmad Majdi Abdul Rani (Universiti Teknologi PETRONAS)

Riaz Ahmed Mufti

Farooque Azam

Sri Hastuty ( Universitas PERTAMINA)

Zeeshan Baig (Centre of Excellence in Science & Applied Technologies)

Murid Hussain (COMSATS Institute of Information Technology)

Nasir Shehzad (COMSATS Institute of Information Technology)

Journal: Processes, Volume 7 ,Issue 8, Article Number 506

Impact Factor: 2.753 Citations: 14 Quartile: 2

Broadband sound absorption in hybrid TPMS metamaterials through a combined computational and experimental investigation 2026

Ali Bin Naveed

Aamir Mubashar

Muhammad Khizer Ali Khan (Khalifa University of Science and Technology)

Sadaqat Ali

Kamran Ahmad Khan (Khalifa University of Science and Technology)

Journal: Materials and Design, Volume:266, Article:116234, Pages:15

Impact Factor: N/A Citations: 0 Quartile: 1

Electro-Discharge Machining of Zr67Cu11Ni10Ti9Be3: An Investigation on Hydroxyapatite Deposition and Surface Roughness 2020

Abdul’Azeez Abdu Aliyu (Bayero University Kano)

Ahmad Majdi Abdul-Rani (Universiti Teknologi PETRONAS)

Saeed Rubaiee (University of Jeddah)

Mohd Danish (University of Jeddah)

Michael Bryant (University of Leeds)

Sri Hastuty (Pertamina University)

Muhammad Al’Hapis Razak (Universiti Kuala Lumpur - Malaysian Spanish Institute (UniKL MSI))

Sadaqat Ali

Journal: Processes, Volume 8(6), Article Number 635

Impact Factor: 2.847 Citations: 9 Quartile: 3

Low-Velocity Impact Response of Composite Sandwich Structure with Hybrid Honeycomb Core 2026

Usman Ayub

Aamir Mubashar

Manzar Masud (Capital University of Science and Technology (CUST))

Muhammad Mughees Aabbas Dogar

Muhammad Saad (Pakistan Institute of Applied Sciences)

Sadaqat Ali

Journal: Journal of Materials Engineering and Performance, Volume:35, Issue:6, Page:5228-5240

Impact Factor: N/A Citations: 0 Quartile: 3

Copper coating of magnesium alloy AZ31 using conventional electrode EDM for enhanced corrosion resistance

Kumail Hussain

Sadaqat Ali

Ammar Tariq

Waqas Alam (Purdue University)

Mohammed Jameel (King Khalid University)

Jana Petrů (VSB-Technical University of Ostrava)

Muhammad Nasir Bashir (VSB-Technical University of Ostrava)

Niaz B. Khan (University of Bahrain)

Journal: Scientific Reports , Accepted

Impact Factor: N/A Citations: 0 Quartile: 1

Effect of process parameters on mechanical properties and microstructure of TIG welded joints between AA 5052-T0 and AA 7075-T0 2026

Muhammad Ammar Khan

Sadaqat Ali

Emad Ud Din

Aamir Mubashar

Muhammad Hanzla Aslam

Muhammad Talal Shahid

Journal: Journal of Materials Research and Technology, Volume 42, Pages 210-222

Impact Factor: N/A Citations: 0 Quartile: 1

Fe-Ni binder modified NbC cermets: A cost-effective solution with superior mechanical properties 2024

Abdul Basit

Furqan Anwar

Sadaqat Ali

Malik Adeel Umer

Tauheed Shahbaz (GIK Institute of Engineering Sciences and Technology)

Emad Ud Din

Aamir Mubashar

Journal: Ceramics International, Volume: 50, Issue: 22, Part C, Pages: 47768-47779

Impact Factor: 5.100 Citations: 2 Quartile: 1

Material characterization of Ti6Al4V alloy additively manufactured using selective laser melting technique 2024

Syed Waqas Ali Shah

Sadaqat Ali

Himayat Ullah (Centres of Excellence in Science and Applied Technologies)

Muhammad Saad (Pakistan Institute of Engineering and Applied Sciences (PIEAS))

Aamir Mubashar

Emad Ud Din

Journal: Journal of Materials Research and Technology, Volume 33, Pages 1756-1763

Impact Factor: 6.200 Citations: 6 Quartile: 1

Experimental investigation of effect of welding parameters on surface roughness, micro-hardness and tensile strength of AISI 316L stainless steel welded joints using 308L filler material by TIG welding 2022

Khubaib Zafar Ghumman

Sadaqat Ali

Emad Ud Din

Aamir Mubashar

Niaz Bahadur Khan

Syed Waqar Ahmed (Universiti Teknologi PETRONAS)

Journal: Journal of Materials Research and Technology , Volume 21, Pages 220-236

Impact Factor: 6.267 Citations: 36 Quartile: 1

Effect of process parameters and material composition of Al2O3-HAP composite using powder metallurgy 2025

Muhammad Tayyab Bhutta

Sadaqat Ali

Malik Adeel Umer

Aamir Mubashar

Emad Ud Din

Adnan Munir

Abdul Basit

Journal: Results in Materials, Volume:25, Article Number 100669

Impact Factor: N/A Citations: 0 Quartile: N/A

Chatter detection and suppression inmachining processes: a comprehensive analysis 2024

Abdul Basit

Niaz Bahadur Khan

Sadaqat Ali

Riaz Muhammad (University of Bahrain)

Dilsora Abduvalieva (Tashkent State Pedagogical University)

M. Ijaz Khan (Lebanese American University)

Mohammed Jameel (King Khalid University)

Journal: International Journal on Interactive Design and Manufacturing, Volume 18, Pages 3751-3771

Impact Factor: 2.100 Citations: 10 Quartile: 3

Optimization of TIG welding parameters for enhanced mechanical properties in AISI 316L stainless steel welds 2024

Khubaib Zafar Ghumman

Sadaqat Ali

Niaz Bahadur Khan

M. Ijaz Khan (Prince Mohammad Bin Fahd University)

Hafiz Tauqeer Ali (Taif University)

Mirjalol Ashurov5 (Tashkent State Pedagogical University)

Journal: International Journal of Advanced Manufacturing Technology, Pages 1-13

Impact Factor: 2.900 Citations: 7 Quartile: 2

Biocompatibility and corrosion resistance of metallic biomaterials 2020

Sadaqat Ali

Ahmad Majdi Abdul Rani (Universiti Teknologi PETRONAS)

Zeeshan Baig (Centre of Excellence in Science and Applied Technologies)

Syed Waqar Ahmed (Universiti Teknologi PETRONAS)

Ghulam Hussain (GIK Institute of Engineering Sciences and Technology)

Krishnan Subramaniam (Manipal International University)

Sri Hastuty (Universitas PERTAMINA)

Tadamilla V.V.L.N. Rao (SRM Institute of Science and Technology)

Journal: Corrosion Reviews, Volume 38(5), Pages 381-402

Impact Factor: 2.400 Citations: 87 Quartile: 2

On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite 2020

Syed Waqar Ahmed (Universiti Teknologi PETRONAS)

Ghulam Hussain (GIK Institute of Engineering Sciences and Technology)

Khurram Altaf (Universiti Teknologi PETRONAS)

Sadaqat Ali

Mohammed Alkahtani (King Saud University)

Mustufa Haider Abidi (King Saud University)

Ayoub Alzabidi (King Saud University)

Journal: Polymers, Volume 12, Issue 9, Article Number 2155

Impact Factor: 4.329 Citations: 54 Quartile: 1

Improving overall equipment effectiveness of cement mills by applying total productive maintenance

Syed Husain Imran Jaffery

Sadaqat Ali

Shahid Ikram Ullah Butt

Shamraiz Ahmad

Hannan Yusuf Khan

Maaz Zakir (UET Peshawar)

Waqas Khalid

Journal: Journal of Industrial Engineering and Management, Accepted

Impact Factor: 0 Citations: 0 Quartile: N/A

Structure and Properties of New Antifriction Composites Based on Tool Steel Grinding Waste 2021

Tetiana Roik (National Technical University of Ukraine)

Ahmad Rashedi (Charles Darwin University)

Taslima Khanam (Charles Darwin University)

Abhay Chaubey (SRM University)

Gurusami Balaganesan (Indian Institute of Technology Jammu)

Sadaqat Ali

Journal: Sustainablity a Journal of MDPI, Volume 13(16), Article Number 8823

Impact Factor: 3.889 Citations: 6 Quartile: 2

Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel 2021

MdAl-Amin (Universiti Teknologi PETRONAS)

Ahmad Majdi Abdul-Rani (Universiti Teknologi PETRONAS)

Mohd Danish (University of Jeddah)

Fatema Tuj Zohura (Sher-e-Bangla Agricultural University)

Saeed Rubaiee (University of Jeddah)

Rasel Ahmed (Universiti Teknologi PETRONAS)

Sadaqat Ali

Murat Sarikaya (Sinop University)

Journal: Journal of Materials Research and Technology , Volume 15, Pages 2557-2574

Impact Factor: 6.267 Citations: 31 Quartile: 1

Numerical analysis of non-aligned inputs M-type micromixers with different shaped obstacles for biomedical applications 2022

Sadaqat Ali

Muhammad Irfan (Najran University)

Imran Shah (National University of Technology)

Usama M Niazi (National Skills University)

Muhsin Ali (Nano Bio Life (Bio health Care))

Mohammed S Jalalah (Najran University)

Muhammad K Asif Khan (Najran University)

Abdulkarem Hussein Mohammed Almawgani (Najran University)

Saifur Rahman (Najran University)

Journal: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, issue 3, Pages 870-880

Impact Factor: 1.822 Citations: 13 Quartile: 3

Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy 2022

Sadaqat Ali

Muhammad Irfan (Najran University)

Usama Muhammad Niazi (National Skills University)

Ahmad Majdi Abdul Rani (Universiti Teknologi PETRONAS)

Ahmad Rashedi (Nanyang Technological University)

Saifur Rahman (Najran University)

Muhammad Kamal Asif Khan (Najran University)

Mabkhoot A. Alsaiari (Najran University)

Stanislaw Legutko (Poznan University of Technology)

Jana Petru (VSB-Technical University of Ostrava)

Antonin Trefil (VSB-Technical University of Ostrava)

Journal: Materials, Volume 15(8), Article Number 2822

Impact Factor: 3.748 Citations: 45 Quartile: 1

Towards the Optimization of Microstructure and Mechanical Properties of NbC-based Cermets

Abdul Basit

Asad Malik

Sadaqat Ali

Malik Adeel Umer

Rafi-ud-Din (Materials Division Pakistan Institute of Nuclear Science and Technolog)

Conference: 4th International Conference on Scientific and Academic Research

Citations: N/A

No IP records found for this faculty member

No training records found for this faculty member

Total Supervisions

PhD Supervisions

MS Supervisions

Loading PhD supervisions...

Loading MS supervisions...