NUST Research Collaborate Portal

Muhammad Salman Khan

Assistant Professor

School of Mechanical & Manufacturing Engineering

About

Dr. Muhammad Salman Khan is working as Assistant Professor in the School of Mechanical & Manufacturing Engineering. Dr. Muhammad Salman Khan has a PhD in Computational Solid Mechanics . Dr. Muhammad Salman Khan has published 22 research articles & conference papers having a citation count of 103 , carried out 0 projects and filed 0 intellectual property.

Research Tags

Composites for Aersoapce applications Computational Mechanics Damage Mechanics based Modelling for Polymeric Composites FEA for Metals and Composites FML Composites Honeycomb Core structures for Aerospace Applications Life Cycle Assessment for sustainable production Multi-Objective Optimization Rapid Prototyping and Additive Manufacturing

Research Projects

Industry Projects

Amount Granted

0.0 M

Publications

Citations

103

Intellectual Property

Publication Types

Project Types

Publications by Year

Projects by Year

Research Collaborators

Education

Experience

Awards

Memberships

No project records found for this faculty member

Research Articles

Conference Proceedings

Books

Book Chapters

Editorial Activities

Investigation of machining parameters and cooling strategies on the burr geometry in micro-milling of titanium alloy (Ti–6Al–4V) 2026

Gulfam Ul Rehman

Muhammad Rizwan Ul Haq

Syed Husain Imran Jaffery

Muhammad Salman Khan

Shahid Ikram Ullah Butt

Journal: Journal of Materials Research and Technology, Volume:41, Page:1353-1367

Impact Factor: 6.600 Citations: 0 Quartile: 1

Damping Characterization of Additively Manufactured Wave Spring: Morphologies for Improved Frequencies and Dynamic Performance 2025

Basit Khan

Muhammad Rizwan Ul Haq

Muhammad Salman Khan

Naveed Akmal Din

Aamer Nazir (King Fahd University of Petroleum and Minerals)

Journal: Mechanics of Advanced Materials and Structures, Pages:18

Impact Factor: N/A Citations: 0 Quartile: N/A

Application of Sayong Ball Clay Membrane Filtration for Ni (II) Removal from Industrial Wastewater 2018

Muhammad Salman Khan

S.F. Mohd Noor (Universiti Teknologi Malaysia)

N. Ahmad (Universiti Teknologi Malaysia)

M.A. Khattak (Universiti Teknologi Malaysia)

Anique Mukhtar (HITEC University)

S. Kazi (Islamic University Madinah)

Saeed Badshah (International Islamic University)

Rafiullah Khan (International Islamic University)

S.F. Mohd Noor (Universiti Teknologi Malaysia)

N. Ahmad (Universiti Teknologi Malaysia)

M.A. Khattak (Universiti Teknologi Malaysia)

Anique Mukhtar (HITEC University)

S. Kazi (Islamic University Madinah)

Saeed Badshah (International Islamic University)

Rafiullah Khan (International Islamic University)

Journal: Journal of Taibah University for Science , Volume 11, Issue 6, Pages 949-954

Impact Factor: 1.640 Citations: 19 Quartile: 2

Enhancing Cutting Efficiency and Minimizing Forces for Nomex Honeycomb Core Using Grey Relational Analysis and Desirability Function Analysis 2023

Hassan Habib

Muhammad Salman Khan

Adnan Munir

Danyal Zahid

Olivia McDermott (University of Galway)

Journal: Small Methods, Article Number: 2300958, Pages: 10

Impact Factor: 12.4 Citations: 2 Quartile: 1

Numerical Modeling of Phase Transformation during Grinding Process 2017

Muhammad Salman Khan

Syed Mushtaq Ahmed Shah (Balochistan University of Engineering and Technology)

M. A. Khattak (Universiti Teknologi Malaysia)

Muhammad Asad (Prince Muhammad Bin Fahad University)

Javed Iqbal (Balochistan University of Engineering and Technology)

Saeed Badshah (International Islamic University)

Syed Mushtaq Ahmed Shah (Balochistan University of Engineering and Technology)

M. A. Khattak (Universiti Teknologi Malaysia)

Muhammad Asad (Prince Muhammad Bin Fahad University)

Javed Iqbal (Balochistan University of Engineering and Technology)

Saeed Badshah (International Islamic University)

Journal: Jurnal Teknologi, Volume 79, Issue 5, Pages 33-41

Impact Factor: - Citations: 1 Quartile: N/A

Enhanced high voltage insulation performance of HTV silicon rubber nanocomposites filled with nano-TiO2 for outdoor applications 2025

Aqeel ur Rehman

Muhammad Salman Khan

ABRAIZ KHATTAK

Nafees Ahmad

Kashif Imran

Yasin Khan (King Saud University)

Khalid Hamad Alkhalid (King Saud University)

Journal: Scientific Reports, Volume:15, Article Number:23735, Pages:14

Impact Factor: 3.9 Citations: 0 Quartile: 1

Sustainability analysis of tool wear, energy efficiency, surface quality, and energy during dry, MQL, and wet turning of Inconel 718 2025

Muhammad Adnan Khan

Riaz Ahmad

Syed Hussain Imran Jaffery (Birmingham City University)

Shahid Ikram Ullah Butt

Muhammad Salman Khan

Danyal Zahid

Journal: International Journal of Sustainable Energy, Volume: 44, Issue:1, Article: 2515447, Pages:33

Impact Factor: 2.7 Citations: 0 Quartile: 4

Analyzing effects of damping materials on automotive bumper beam assembly under different velocity conditions 2024

Dil Jan

Shahid Ikram Ullah Butt

Muhammad Salman Khan

Nasir Mahmood Ahmad

Ghullam Hussain (University of Bahrain)

Journal: Journal of Thermoplastic Composite Materials, Pages 1-19

Impact Factor: 3.3 Citations: 2 Quartile: 2

Effect of Surfactants on the Tribological Behavior of Organic Carbon Nanotubes Particles Additive under Boundary Lubrication Conditions 2022

Anthony Chukwunonso Opia (Universiti Teknologi Malaysia)

Mohd Kameil Abdul Hamid (Universiti Teknologi Malaysia)

Samion Syahrullail (Universiti Teknologi Malaysia)

Charles C. Johnson (Niger Delta University)

Stanley Chinedu Mamah (Alex Ekwueme Federal University)

Audu Ibrahim Ali (Universiti Teknologi Malaysia)

Mazali Izhari Izmi (Universiti Teknologi Malaysia)

Che Daud Zul Hilmi (Universiti Teknologi Malaysia)

Muhammad Salman Khan

Abu Bakar Abd Rahim (Universiti Teknologi Malaysia)

Journal: Tribology Online, Volume 17 (1), Pages 19-31

Impact Factor: N/A Citations: 7 Quartile: N/A

Techno-economic feasibility analyses of grid- connected solar photovoltaic power plants for small scale industries of Punjab, Pakistan 2022

Monib Ahmad

ABRAIZ KHATTAK

Ahmad Aziz Alahmadi (Taif University)

Muhammad Salman Khan

Nasim Ullah (Taif University)

Abdul Kashif Janjua

Journal: Frontiers in Energy Research, Volume 10, Article Number 1028310

Impact Factor: 3.858 Citations: 10 Quartile: 3

Effects of cell aspect ratio and relative density on deformation response and failure of honeycomb core structure 2020

Muhammad Salman Khan

Seyed Saeid Rahimian Koloor (Technical University of Liberec)

Mohd Nasir Tamin (Universiti Teknologi Malaysia)

Journal: Materials Research Express, Volume 7, Issue 1, Article Number 015332

Impact Factor: 1.620 Citations: 7 Quartile: 4

Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings 2020

Muhammad Salman Khan

Ainullotfi Abdul-Latif (Universiti Teknologi Malaysia)

Seyed Saeid Rahimian Koloor (Technical University of Liberec)

Michal Petru (Technical University of Liberec)

Mohd Nasir Tamin (Universiti Teknologi Malaysia)

Journal: Polymers, Volume 13, Issue 1, Article Number 52

Impact Factor: 4.329 Citations: 34 Quartile: 1

Cost Evaluation of Proposed Decommissioning Plan of Candu Reactor 2018

M. A. Khattak (Universiti Teknologi Malaysia)

Abdoulhdi Aamhmad Borhana Omran (Universiti Tenaga Nasional)

Muhammad Salman Khan

Hafiz Muhammad Ali (UET Taxila)

Sonia Nawaz (UET Taxila)

Zarak Khan (HITEC University)

Journal: Journal of Engineering Science and Technology, Volume 13, No.10, Pages 3173-3189

Impact Factor: - Citations: 0 Quartile: N/A

A Review of Failure Modes of Nuclear Fuel Cladding 2019

M. A. KHATTAK1, (ARL Laboratory Services)

ABDOULHDI A. BORHANA OMRAN (Universiti Tenaga)

S. KAZI (isra university )

Muhammad Salman Khan

HAFIZ M. ALI (University of Engineering and Technology)

SYEDA L. TARIQ (University of Engineering and Technology)

MUHAMMAD A. AKRAM (University of Engineering and Technology)

Journal: Journal of Engineering Science and Technology, Volume: 14 Issue: 3 Pages: 1520-1541

Impact Factor: 0 Citations: 0 Quartile: N/A

Experimental investigation of the microscopic damage development at mode I fatigue delamination tips in carbon/epoxy laminates 2016

Rafiullah Khan (International Islamic University)

Rene Alderliesten (Technical University Delft)

Saeed Badshah (International Islamic University)

M. A. Khattak (Universiti Teknologi Malaysia)

Muhammad Salman Khan

Rinze Benedictus (Technical University Delft)

Journal: Journal Teknologi, Volume 78, Issue 11, Pages 33-40

Impact Factor: - Citations: 9 Quartile: N/A

Design for Additive Manufacturing Driven Multi-Layered Hybrid Mechanical Metamaterials for Improved Mechanical Performance 2025

Mehmood Khan

Muhammad Rizwan Ul Haq

Muhammad Salman Khan

Shahid Ikram Ullah Butt

Aamer Nazir (King Fahd University of Petroleum and Minerals)

Asad Ullah Jan

Journal: Advanced Engineering Materials, Article Number:2402737, Pages:15

Impact Factor: 3.4 Citations: 2 Quartile: 2

Fabrication and Performance Analysis of Novel HTV Silicon Rubber Nanocomposites for High Voltage Insulation in Outdoor Environment 2025

Aqeel ur Rehman

Muhammad Salman Khan

ABRAIZ KHATTAK

Yasin Khan (King Saud University)

Khalid Hamad Alkhalid (King Saud University)

Journal: IEEE Access, Volume:13, Page:19049-19063

Impact Factor: 3.400 Citations: 1 Quartile: 2

Experimental and Numerical Analysis of Titanium 3D Body-Centered Cubic Lattice Structure Additively Manufactured Using Selective Laser Melting 2025

Asad Ullah Jan

Adnan Munir

Muhammad Rizwan Ul Haq

Muhammad Salman Khan

Ahsan Kaleem (Pakistan Institute of Additive Manufacturing)

Muhammad Naveed Ahsan (Pakistan Institute of Additive Manufacturing)

Aqeel Ahsen Khurram (Pakistan Institute of Additive Manufacturing)

Mehmood Khan

Journal: 3D Printing and Additive Manufacturing, Pages 1-12

Impact Factor: 2.300 Citations: 2 Quartile: 3

Role of stacking sequence, metal sheets, and nano particle on strength and toughness of FMLs 2024

Syed Hameed Hussain

Aqeel Ahsan Khurram (Pakistan Institute of Additive Manufacturing)

Adnan Munir

Muhammad Salman Khan

Aamir Mubashar

Journal: Journal of Reinforced Plastics and Composites, Pages 1-11

Impact Factor: 3.100 Citations: 0 Quartile: 2

Statistical Analysis of Burr Width and Height in Conventional Speed Micro-Milling of Titanium Alloy (Ti-6Al-4V) by Varying Cutting Parameters Under Different Lubrication Methods: Dry, MQL and Wet

Gulfam Ul Rehman

Muhammad Rizwan Ul Haq

Manzar Masud (Capital University of Science and Technology (CUST))

Syed Husain Imran Jaffery

Muhammad Salman Khan

Shahid Ikram Ullah Butt

Conference: ICAME 2025: International Conference on Advances in Mechanical Engineering

Citations: N/A

Normalization and weighting methods for precise and standardized sustainability assessment: recent practices in manufacturing

Shamraiz Ahmad

K Y Wong (Universiti Teknologi Malaysia)

I Zahid (Government College University)

Z Hussain (National Textile University)

Muhammad Salman Khan

M Sarfaraz (Universiti Teknologi Malaysia)

Conference: International Conference on Applications & Design in Mechanical Engineering 2019

Citations: N/A

Vehicles 2025

Reviewed Papers for Journals

Impact Factor: 2.2

Materials Research Express 2025

Reviewed Papers for Journals

Impact Factor: 2.2

Materials Research Express 2025

Reviewed Papers for Journals

Impact Factor: 2.2

Engineering Research Express 2025

Reviewed Papers for Journals

Impact Factor: 1.5

Journal of the Brazilian Society of Mechanical Sciences 2024

Reviewed Papers for Journals

Impact Factor: 1.8

Discover Applied Sciences 2024

Reviewed Papers for Journals

Impact Factor: 2.8

Engineering Research Express 2024

Reviewed Papers for Journals

Impact Factor: 1.7

Mechanics of Time-Dependent Materials 2024

Reviewed Papers for Journals

Impact Factor: 2.5

Materials Research Express 2023

Reviewed Papers for Journals

Impact Factor: 2.025

No IP records found for this faculty member

No training records found for this faculty member

Total Supervisions

PhD Supervisions

MS Supervisions

Loading PhD supervisions...

Loading MS supervisions...